BT Controller v1.4 APK
Google play Store
Go To Adf.ly
Games:
Riptide GP
Sonic CD
Sonic4 Episode 1 & 2
GTA3
Zenonia4
Shine Runner
Open BT Controller on both devices
Allow bluetooth to turn on by pressing 'Yes' at the prompt
Set one device as visible if you have never connected these devices via bluetooth before (you can do this by pressing the 'Visible' button
Press the connect button on the other device (the one that was not made visible) and then press scan to locate your other device
Once the device comes up in the list select it to connect
Once the devices have connected you will be given the option to select the purpose of the device. Select 'Host' if the device is going to run the emulator or 'Controller' if you plan to use this device as a gamepad
The other device will automatically switch to the appropriate purpose
Connect any additional devices by connecting from the controllers to the host, you can not connect from the host to a new controller.
On the Host, you will need to do 2 things. Enabled the BT Controller Keyboard and Set the BT Controller as active.
A checklist will appear in the top right corner for the host device.
You can click the check boxes to bring up the relevant setting screen to enable and activate the BT Controller keyboard
Once both have been set correctly the checklist will show you the controller device's input for testing. If the input is working correctly you can close the overlay and open up your emulator or game that supports custom input.
Navigate to the input configuration for your emulator or game and set up each button (Key mappings in snesoid, you also need to enable the custom input option in "Other settings".
Start a game/rom
What's in this version : (Updated : Aug 4, 2012)
Multiplayer support (Additional controllers must connect to the host)
Custom joystick codes (double tap joystick tile in edit mode)
Full btcontroller keyboard on host
Reset helper screens in settings
Controler Builder: Button to assign all remaining tile keycodes
Corrected Joystick resizing for different screens
Multiplayer support (Additional controllers must connect to the host)
Custom joystick codes (double tap joystick tile in edit mode)
Full btcontroller keyboard on host
Reset helper screens in settings
Controler Builder: Button to assign all remaining tile keycodes
Corrected Joystick resizing for different screens
Required Android O/S : 2.0.1+
Screenshots :
